Tamala Shield Sealer and Data Sheet

Tamala Shield is specialized water based acrylic emulsion/silicone surface treatment with exceptional binding qualities, designed for the treatment of vertical and horizontal surfaces.

When applied correctly it repels water and is resistant to bacterial and fungal attack, assisting in the retardation of substrate discolouration. It allows the substrate to "breathe" naturally allowing trapped moisture to escape.

The product dries to a clear matt finish, is UV stable and is virtually undetectable upon application. It can last many years when applied correctly and has been used successfully on all Natural Limestone products.

Product Specifications

Coverage: 1-2 m² per Litre

Finish: Clear Matt-non-yellowing

Durability: Up to 10 years.

Appearance: Milky white liquid.

Toxicity: Extremely low V.O.C (Volatile Organic Compounds)

Volatility: Non-flammable

Suited: Natural Tamala Limestone

Packaged: 5, 20 and 200 Litre Containers

Preparation:

Ensure the area to be treated is clean of all surface contaminants/dirt and is completely dry.

Application:

Apply one coat TAMALA-SHIELD using the flood coat method, starting at the top of the area being treated, working in a sideways and downwards motion allowing the material to run ahead of itself to provide complete coverage.

CAUTION:

1. Do not apply TAMALA-SHIELD if rain is expected within 12 hours.

2. Do not apply TAMALA-SHIELD if the temperature is below 10 degrees Celsius or above 85% Relative Humidity.

3. Cleaning of equipment is recommended with HOT water and detergent.

Note:

Ashlar Stone warrants that its products have been manufactured under strict control and conform to the highest standards. The performance of the product may vary depending upon the nature of the surface to which it is applied and the preparation and method of application of the product. Where these procedures are beyond the control of Ashlar Stone, nothing contained herein shall constitute a warranty, either expressed or implied, as to the suitability of the product for a specific application. The customers are advised in each instance to satisfy themselves that the product meets their particular requirements.

Material Safety Data Sheet

IDENTIFICATION
Product Name:

Trade Name: TAMALA SHIELD U.N. No: N/A

Dangerous Goods Class/and Subsidiary Risk: N/A

Hazchem Code: N/A

Poisons Schedule: N/A

(N/A = Not Applicable)

Use:

Deep impregnating water repellent sealer-binder for low and high porosity substrates.

Physical Description/Properties:

Appearance: Milky Liquid Specific Gravity: 1.00

Boiling Point: 100 Degrees Celsius. (water) pH Level: approx. 9

Vapour Pressure: 30 (water) mm Hg@25c Percent Volatiles: 65%

Odour: Mild Ignition Temp: approx 570C

Flash Point: N/A Solubility: Miscible(water)

Explosion Limits: N/A

Ingrediants:
Chemical Entity Cas No. Proportion

Siliconate 016-689-438 ( Low < 20% )

Emulsions None Allocated ( Low < 20% )

Additives Non-Hazardous ( Low 5 - 10% )

Water 7732-18-5 to 100%

HEALTH HAZARD INFORMATION
Health Effects:

Swallowed: Slightly irritating, may affect digestive tract when swallowed in volume.

Eye: Irritating, will affect eyes with possible long-term damage.

Skin: Slightly irritating, may affect skin on prolonged contact.

Inhaled: Slightly irritating, may cause nausea on prolonged contact.

First Aid:

Swallowed: If poisoning occurs contact a doctor or poisons information service. Do NOT induce vomiting. Give water to drink and seek medical advice.

Eye: Gently flush with running water, holding eyelids open for 15 mins. Seek medical attention.

Skin: Wash affected area immediately with soap and water.

Inhaled: Water based - treat as for drowning.

Advice to doctor:  : Treat symptomatically.

PRECAUTIONS FOR USE

Exposure Limits: None Established.

Personal Protection: Normal site protection. Observe good industrial hygiene.

Flammability: Not applicable.

Ventilation: Use in a ventilated area. For enclosed spaces suitable breathing apparatus should be worn.

SAFE HANDLING INFORMATION

Storage and transport: Store in a cool dry place, out of reach of children.

Fire/explosion hazard: Not applicable.

Spills and Disposal: Do not allow large spills to enter drains or sewers. Inform police if this occurs. Absorb spilt product onto sand or earth dispose to landfill in accordance with State & Local regulations.